summary

  HT48F06E, HT48F10E and HT48F30E is eight of the single chip microcomputer high performance reduced instruction set, designed for economy much input/output control design of the products. The chip to provide specific functions inside can enhance the flexibility of use, for example, suspend mode and sensei function, oscillator choice, a buzzer drive, etc. These characteristics of the use can reduce application to reduce the cost of product external device.

   Low power consumption, high performance, flexible I/O mouth function and a low price advantage, make this multi-function chips can be widely used in various applications, such as industrial control, consumer products, subsystem controller, etc. This series of all SCM all have the same characteristics, the main difference is the input/output pin number, RAM and ROM capacity and packaging.

   This series of all microcontroller program memory for Flash type, so more simple and efficient can for program updates. Built-in immutable EEPROM can be used to preserve fixed data, such as product Numbers, the calibration value and other specific product information, etc. This series of all single chip HOLTEK development system and with programming tools can provide efficient product development cycle.
 

characteristics

Working voltage:
FSYS = 4 MHz: 2.2 V to 5.5 V
FSYS = 8 MHz: 3.3 V to 5.5 V
FSYS = 12 MHz: 4.5 V to 5.5 V
But many programming FLASH program memory
13 ~ 23 take pull resistance two-way input/output
External interruption input
Take YuFen frequency and interrupt function of the timing/counter
Crystal and RC oscillator
External count input
The watchdog timer
PFD/Buzzer driver output
HALT function and sensei can reduce power consumption
In the VDD = 5 V, the system clock for 8 MHz, instruction cycle for 0.5 μ s

A operation instruction
Look-up table instructions
Article 63 instructions
All the instructions one or two complete machine cycle
Low voltage reset function
Program memory (FLASH) can repeat burn to write
100000 times
Program memory (FLASH) insurable the data is more than 10
years
Data storage (EEPROM) can repeat burn to write
1000000 times
Data storage (EEPROM) can keep the data is more than 10
years
ICP (In-Circuit Programming) interface
Can provide complete support hardware and software tools